BA Post

来自WordPress中文文档
Mobiler讨论 | 贡献2011年9月13日 (二) 06:20的版本 (1个修订)
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至: 导航搜索

Restore CAMERA after using Siemens upgrade on PDA2K

Wiki Comment

The Siemens SX66 has the Model Number PH20B1 and is shipped without a Camera. Thus, any upgrade performed with a Siemens ROM will lack the necessary files to support the built-in camera.

The Thread on this subject is.

Restore CAMERA after using Siemens upgrade on PDA2K

Original text Formatting added

It took me a couple of hours of finding out which files where needed and how to rebuild an unremovable CAB file, but I've done it!

(thank you so much, I have voicemail notifications!).
  • I took the Camera patch CAB file from Wiki and replaced all the necessary files and
  • threw the new CAB file into my Extended ROM and
  • hard-resetted my PDA2K.

Now, I'm at 1.33.10 with Radio 1.06.02 and full Camera and MMS support on my PDA2K! Woohoo!

You can run the CAB file on your existing setup, or you can pop it into your Ext. ROM, too.

Camera_2.21b18157.sa.CAB