HTC GSM

来自WordPress中文文档
Mobiler讨论 | 贡献2011年9月13日 (二) 06:29的版本 (1个修订)
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至: 导航搜索

wince init string:

Action Blueangel Universal Himalaya Alpine Magician Athena Hermes
Reset device ATZ ATZ ATZ ATZ ATZ ATZ ATZ
No autoanswer ATS0=0 ATS0=0 ATS0=0 ATS0=0 ATS0=0 ATS0=0 ATS0=0
Echo off ATE0 ATE0 ATE0 ATE0 ATE0 ATE0 ATE0
Enable responses ATQ0 ATQ0 ATQ0 ATQ0 ATQ0 ATQ0 ATQ0
Numerical responses ATV0 ATV0 ATV0 ATV0 ATV0 ATV0 ATV0
No wait on dialtone ATX3 ATX3 ATX3 ATX3 ATX3 ATX3 ATX3
CD follows carrier AT&C1 AT&C1 AT&C1 AT&C1 AT&C1 AT&C1 AT&C1
Enter command with DTR AT&D1 AT&D1 AT&D1
Enable extended error messages AT+CMEE=1 AT+CMEE=1 AT+CMEE=1 AT+CMEE=1 AT+CMEE=1 AT+CMEE=1 AT+CMEE=1
Enable cellular result codes AT+CRC=1 AT+CRC=1 AT+CRC=1 AT+CRC=1 AT+CRC=1 AT+CRC=1 AT+CRC=1
Service reporting control AT+CR=1 AT+CR=1 AT+CR=1 AT+CR=1 AT+CR=1 AT+CR=1 AT+CR=1
AT+CREG=1 AT+CREG=1 AT+CREG=1
AT+CMOD=0 AT+CMOD=0 AT+CMOD=0 AT+CMOD=0 AT+CMOD=0 AT+CMOD=0
AT+FCLASS=0 AT+FCLASS=0 AT+FCLASS=0 AT+FCLASS=0 AT+FCLASS=0 AT+FCLASS=0 AT+FCLASS=0
AT+CSSN=0,1 AT+CSSN=0,1 AT+CSSN=0,1 AT+CSSN=0,1 AT+CSSN=0,1 AT+CSSN=0,1 AT+CSSN=0,1
AT+CLIP=1 AT+CLIP=1 AT+CLIP=1
AT+COLP=0 AT+COLP=0 AT+COLP=0 AT+COLP=0 AT+COLP=0 AT+COLP=0 AT+COLP=0
AT+CCWA=1 AT+CCWA=1 AT+CCWA=1 AT+CCWA=1 AT+CCWA=1 AT+CCWA=1 AT+CCWA=1
AT+CSCS="HEX" AT+CSCS="HEX" AT+CSCS="HEX" AT+CSCS="HEX" AT+CSCS="HEX" AT+CSCS="HEX" AT+CSCS="HEX"
AT+CMGF=0 AT+CMGF=0 AT+CMGF=0 AT+CMGF=0 AT+CMGF=0 AT+CMGF=0 AT+CMGF=0
AT+CGREG=1 AT+CGREG=1 AT+CGREG=1 AT+CGREG=1 AT+CGREG=1 AT+CGREG=1 AT+CGREG=1
AT+CUSD=1 AT+CUSD=1 AT+CUSD=1 AT+CUSD=1 AT+CUSD=1 AT+CUSD=1 AT+CUSD=1
AT+CMUT=0 AT+CMUT=0 AT+CMUT=0 AT+CMUT=0 AT+CMUT=0 AT+CMUT=0 AT+CMUT=0
AT+CLIR=0 AT+CLIR=0 AT+CLIR=0
AT+CNMI=1,2,2,2,0 AT+CNMI=1,2,2,2,0 AT+CNMI=1,2,2,2,0
AT%SATC=1 AT+GTKC=1 AT%SATC=1 AT%SATC=1 AT%SATC=1 AT+GTKC=1 AT+GTKC=1
AT%HTCCSQ=1 AT@HTCCSQ=1 AT%HTCCSQ=1 AT%HTCCSQ=1 AT%HTCCSQ=1 AT@HTCCSQ=1 AT@HTCCSQ=1
AT+CGEQREQ=1,4,0,0,0,0,2,0,"0E0","0E0",3,0,0 AT+CGEQREQ=... AT+CGEQREQ=...
AT@HTCDIS=1 AT@HTCDIS=1 AT@HTCDIS=1
AT+CGAATT=0,1,0
AT+BANDSEL=2,1
AT@USBPOWER=1
AT+CPPP=1 AT+CPPP=1
AT+RADIOVER AT+RADIOVER
AT@HTCSAP=1 AT@HTCSAP=1

(+:observed,H:Himalaya,B:Blueangel,U:Universal,A:Alpine,M:Magician,W:Wizard,a:Athena,h:Hermes)

Command Options Which Description
ATS7 =%u U
ATS10 =%u U
AT$2G_RESEL_PARA? ah
AT$2G_RESEL_STATUS? ah
AT$3G_AGC_STATUS? a
AT$3G_BLER_STATUS? a
AT$3G_DCH_STATUS_A? a
AT$3G_DCH_STATUS_D? a
AT$3G_DCH_STATUS_M? a
AT$3G_DL_RLC_AM_ST? a
AT$3G_DL_TF_COMB_ST? a
AT$3G_DL_TF_COMB_ST_2? a
AT$3G_DL_TF_COMB_ST_3? a
AT$3G_DL_TF_STATUS? a
AT$3G_DL_TF_STATUS_2? a
AT$3G_DL_TF_STATUS_3? a
AT$3G_NEIGHBOR_ST? a
AT$3G_NEIGHBOR_ST_2? a
AT$3G_RESEL_EVENT? a
AT$3G_RESEL_PARA? a
AT$3G_RESEL_STATUS? a
AT$3G_UL_RLC_AM_ST? a
AT$3G_UL_TF_STATUS? a
AT$AD =100,102(M) H+BM+ Audio
AT$AU 100,102(M) H+BM+ Audio
AT%A0 BUah
AT%ALS 0 H+B
AT+ALS =%u U+a
AT$AMR =%u a
AT@APDU Ua
AT%ATR U
AT@ATR a
AT@AUDIOSET %u,0,0,%u U+a $10,2,3,7 ; $2=volume
AT%AUDIOTEST =%u Ba 1 will create a connection between mic and speaker
AT@AudioTuneSave a
AT@AudioTune %u,%u,%u,%u,%s ?%u,%u a
AT%BAND B
AT+BANDSEL %u,%u U+a UMTS2, GSM=1
AT+BANDSET =%u a
AT+BLDN B BT: Redials the previously dialed number.
AT+BRSF B BT: Retrieves the supported features.
AT+BSIR B BT: switch on/off the in-band ring tone.
AT@HTC_BTFIR =%u,%u,%s U BT headset parameters
AT%BTPATH =0;=1 A
AT+BVRA B BT: Enables or disables voice recognition in the Audio Gateway.
AT%CAOC B
AT+CAOC Ba Advice of charge
AT%CACM B
AT+CACM Ba Accumulated call meter
AT+CAMM Ba Accumulated call meter maximum
AT%CBHZ B
AT+CBC B Battery charge
AT+CBM B New cell broadcast (CB) Message Receipt
AT+CBST =%u,%u,%u BAU+a Bearer service type
AT%CCBS B
AT+CCCM B Current call meter
AT+CCFC =%u,%u,"%s",%u,%u BAU+ Call forwarding
AT+CCUG =%u B Closed user group
AT+CCWA =1,%u,%u H+BU+ BT: Enables call waiting notification in the Audio Gateway.
AT+CCWE B Call meter maximum event
AT+CDS B Call data services
AT+CEER B Extended error report
AT+CFUN =%u H+BU+ Set phone functionality
AT%CGAATT B GPRS Attach/Detach Mode
AT+CGAATT =0,1;=%u,%u,%u AU+
AT+CGACT =%u,%u BU+ Packet Data Protocol(PDP) context activate or deactivate
AT+CGANS B Manual response to a network request for Packet Data Protocol context activation
AT+CGATT %u BU+ GPRS attach or detach
AT+CGAUTO B Automatic response to a network request for PDP context activation
AT+CGCLASS "%s", BU GPRS mobile station class
AT%CGCLASS B
AT+CGDATA B Enter data state
AT+CGDCONT =1,"IP","internet","",0,0 BU+ Define Packet Data Protocol Context
AT+CGEREP B GPRS event reporting
AT+CGEQREQ 1,4,0,0,0,0,2,0,"0E0","0E0",3,0,0 U+
AT+CGREG H+B GPRS network registration status
AT+CGMI BU+ Issue manufacturer ID code
AT+CGMM BU+ Issue model ID code
AT%CGMM B
AT+CGMR BU+ Output the GSM telephone version
AT+CGPADDR %u BU Show PDP address
AT+CGSN BU+ Request Product Serial Number Identification
AT%CGPCO 1,"PAP,<username>,<password>",1 B First 1=ASCII, PAP, second 1==CID
AT%CGPPP 0=No negotiation, 1=PAP, 2=CHAP, 3=automatic H+B PPP auth
AT+CGQMIN B Quality of Service Profile (Minimum acceptable)
AT+CGQREQ B Quality of Service Profile (Requested)
AT%CGREG B
AT+CGREG BU+ GPRS network registration status
AT+CGSMS %u BU Select service for MO SMS messages
AT+CHLD 1%u;=2%u BU+ Call hold and multiparty
AT+CHSC B HSCSD current call parameters
AT+CHSD B HSCSD device parameters
AT+CHSN B HSCSD non-transparent call configuration
AT+CHSR B HSCSD parameters report
AT+CHST B HSCSD transparent call configuration
AT+CHSU B HSCSD automatic user initiated upgrading
AT+CHUP B Call hangup. Rejects an incoming call.
AT+CHZ =%d a 0,1
AT+CIEV B BT: indicator status
AT+CIMI H+B+ Output of IMSI
AT+CIND B Reads the current status of the AG indicators.
AT+CKPD B Keypad control
AT+CLAC B List all commands (well... nearly all)
AT+CLAE B Language event
AT+CLAN B Set/Get language
AT+CLCC H+BU+ List Current Calls
AT+CLCK "%s",%u,"%s" H+BU+ Switch locking on and off
AT+CLIP =%d H+BU+ call line identification.
AT+CLIR =%u H+BU+ Select Incognito Mode (Call Line Identification Restriction)
AT+CLVL =%u BU+ Loudspeaker volume level (U:102,200)
AT+CMEE H+BU+ Expanded error messages according to GSM 07.07
AT+CMER B Registers or unregisters status updates.
AT+CMGC B Send an SMS command
AT+CMGD %u BU Delete an SMS in the SMS memory
AT+CMGF H+BU+ SMS format
AT+CMGL B List SMS
AT+CMGR %u BU Read in an SMS
AT+CMGS =%u? H+BU+ Send an SMS
AT+CMGW =%u,%u BU Write an SMS to the SMS memory
AT+CMMS =1 BU More (Short) Message to Send
AT+CMOD H+BU+ Call mode selection
AT+CMSS =%u BU Send an SMS from the SMS memory
AT+CMUT =%u H+BU+ Mute control
AT+CMUX B Multiplexing mode
AT%CNAP B
AT+CNMA =%u BU Acknowledgment of a short message directly output
AT+CNMI 1,2,2,2,0 H+BU+ Display new incoming SMS
AT+CNUM H+BU+ Read own numbers
AT+COLP %d H+BU+ Connected Line Identification Presentation
AT%COLR B
AT+COPN B Read operator names
AT+COPS =%d,%u H+BU+ Commands concerning selection of network operator
AT%COPSLAC B
AT+COTA B
AT+CPAS BU+ Query the telephone status
AT+CPBF B Find telephone-book entry
AT+CPBR =%u,%u H+BU+ Read a telephone-book entry
AT+CPBS ="%s" H+BU+ Select a telephone book
AT+CPBW =%u,"%s",%u BU+ Write a telephone-book entry
AT%CPI BM Call progress information
AT+CPIN ="%s","%s",%d H+BU+ Enter PIN and query lock
AT+CPINC Ua
AT+CPMS BU+ Preferred SMS message storage
AT+CPOL %u,%u BU+ Preferred operator list
AT+CPPP =%d U+a U=2,a=1,h=1
AT%CPRI B
AT%CPRIM "GMM","CONFIG MULTISLOT_CLASS<%u>" H+B  %u=10
AT+CPUC Ba Price per unit and currency table
AT+CPWD ="%s","%s","%s" BU+ Change password to a lock
AT+CR H+BU+ Service reporting control
AT@CR Ua 1.06: Card Read
AT@CRS U 1.06:
AT+CRC H+BU+ Cellular result codes
AT+CREG H+BU+ Network registration
AT+CRES B Restore settings
AT+CRING B Incoming Call Indication
AT+CRLP B Select radio link protocol parameter for originating non-transparent data call
AT+CRSL B Ringer sould level
AT+CRSM =%u,%u,%u,%u,%u BU+a Restricted SIM access. $1=176,178,192. $2=28433,28435,28436,28439,28480,28599,28613,28615,28618,28619
AT+CSAS H+BU+ Save settings
AT+CSCA BU+ Address of the SMS service center
AT+CSCB %d,"%s" H+BU+ Select cell broadcast messages
AT+CSCS H+BU+ Select TE character set
AT+CSDH B Show text mode parameters
AT+CSIM =%u,* a
AT+CSMP B Set additional parameters for text mode messages
AT+CSMS BU+ Selection of message service
AT+CSNS B Single numbering scheme
AT+CSQ H+BU+a Output signal quality
AT%CSQ B Output signal quality ?
AT+CSSI B Notification values
AT+CSSN H+BU+ Supplementary service notifications
AT+CSSU B Notification values
AT+CSTA B Select type of address
AT+CTFR ="%s",%u BU Divert an Incoming Call When User Busy?
AT%CTV B
AT%CTZV a
AT%CUNS B
AT+CSVM B Set voice mail number
AT+CUSD =1,"2A333723",15;=1,"2%u",15;=1,"1%u",15 H+BAU+ Unstructured Supplementary Service Data
AT%DPRAMTEST =1 Ba DPRAM loopback
AT+DR B Data compression reporting
AT+DS Ba Data compression selection
AT+ES Ba Error control selection 6,,8
AT+ESA =0,,,,0,0,255 a
AT+FAA B FAX Adaptive answer
AT+FAP B FAX Address and polling capabilities
AT+FBO %u Ua
AT+FBS B FAX buffer size
AT+FBU B FAX HDLC frame reporting
AT+FCC a
AT+FCLASS 0;=1;=2.0;=8 H+BU+ Selects, reads or tests the Service Class
AT+FCLASS+1 B Selects, reads or tests the Service Class?
AT+FCQ B FAX Copy quality checking
AT+FCR %u U
AT%FDNPIN B
AT+FDR a
AT+FDT a
AT+FEA B FAX EOL alignment
AT+FFC B FAX Format conversion
AT+FIE B FAX Procedure interrupt enable
AT+FIP B FAX Set default settings
AT+FIT B FAX Host inactivity timer
AT+FKS B FAX Session termination
AT+FLI "%s" Ua
AT+FLO B FAX Flow control
AT+FLP B FAX Poll indication
AT+FMI B FAX Modem manufacturer
AT+FMM B FAX Modem model
AT+FMR B FAX Modem revision
AT+FMS B FAX Minimum phase c speed
AT+FND B FAX Non-standard message data indication
AT+FNS B FAX Non-standard frame FIF
AT+FPA B FAX Selective polling address
AT+FPP B FAX Packet protocol control
AT+FPW B FAX Password
AT+FRH %u U
AT+FRM %u U
AT+FRQ B FAX Receive quality threshold
AT+FRS %u U
AT+FRY B FAX CTC/ECM retry value
AT+FSA B FAX Destination subaddress
AT+FSP B FAX Enable polling parameter
AT+FTH %u U
AT+FTM %u U
AT+FTS %u U
AT+GCAP B Complete capabilities list
AT+GCI B Country of installation
AT+GEVL a
AT+GIMG =%u,%u,%u,%u a
AT+GMI B Manufacturer identification
AT+GMM B Model identification
AT+GMR B Revision identification
AT+GSN B Product serial number identification
AT$GPRS? a
AT$GSM? a
AT+GTKA U
AT+GTKC =1 U+
AT+GTKD =0;=1 Ua
AT+GTKE U+
AT+GTKI U
AT+GTKN U
AT+GTKR U+
AT+GTKT %u,%u Ua
AT%IATT H+BU+
AT+ICF B DTE-DCE character framing
AT+IFC B DTE-DCE flow control
AT+ILRR B DTE-DCE local rate reporting
AT+IPR B Fixed DTE rate
ATH
ATH0
AT$HSDPA_CQI_STATUS? a
AT+HSDPA %u a
AT@HTC_BTFIR =%u,%u,%s Ua
AT%HTCCSQ B
AT@HTCCSQ =1 U+
AT@HTCDIS =1 U+
AT%HTCLOCK BU
AT$L3_RRC_SIGNAL? a
AT$PRACH_RACH_INFO? a
AT%NRG B
AT@PORTSWITCH 1 U
AT+PUKRESET B
AT@RSIM Ua 1.06:
AT%SATA B SIM Application Toolkit alert
AT%SATC 1,FFFFFF7F00000010 H+BAU Configuration for SIM Application Toolkit
AT%SATE Ba Send SIM Application Toolkit envelope command
AT%SATI B SIM Application Toolkit indication ?
AT%SATN B SIM Application Toolkit notification
AT%SATR B Send SIM Application Toolkit command response
AT%SATT B Terminate SIM Application Toolkit command or session
AT@SIMON Ua
AT@SIMOFF Ua
AT@SIMTYPE U+a
AT@SIMLOCK %x,%?,%8d U+
AT@SIMLOCK?40 U+
AT@SIMLOCK?80 U+
AT%SNCNT B
AT@SYSTEMTIME %u,%u,%u,%u,%u,%u U+a HH,MM,SS,YY,MM,DD
AT%TALK %d,%x H+BAaU
AT@TALK?0 U+
AT@TALK?1 U+
AT%TEST B
AT+TTYMODE =%u a
AT@USBPOWER =1 U+a
AT$V0 B
AT%VER B Shows internal versions
AT+VGM gain B Notifies the AG service when the microphone volume on the headset is changed to the specified gain value.
AT+VGS gain B Notifies the AG service when the speaker volume on the headset is changed to the specified gain value.
AT@VOLSET %u U+a 2,5 see AT@AUDIOSET
AT+VTD Ba DTMF generation
AT+VTS =%c,%u BU Transmits DTMF codes to the network.
AT$WCDMA? a
AT+WS46 B WDS side stack selection
ATD>nnn nnn B Dial a number nnn from memory
ATD*03*330*%s*%s*%s#
ATD**05%s*%s*%s*%s#
ATD%c43*%u#
ATD%c43#
ATD#37*%u#
ATD#37# U

Responses:

Response Options Where Comment
+ALS: U+
%ATR U
+BANDSET: a
+CACM:
+CAMM: %u U
+CAOC:
+CBM:
+CBMI: Notification of a cell broadcast message.
+CBST:
+CCCM:
+CCFC: %u,%d,"%s",%u,%u U+
+CCUG:
+CCWA: 1,%u,%u U+
+CDS:
+CDSI: Notification of an SMS status report message.
+CFUN: H+U+
+CGAATT:
+CGACT: U+
+CGATT: U+
+CGCLASS:
+CGDCONT:
+CGEV:
+CGMI: HTC U+
+CGMM: HTC U+
+CGMR: HTC U+
+CGSN: imei+01 U+
+CGPADDR:
+CGQMIN:
+CGQREQ:
+CGREG: U+
+CGSMS:
+CHLD:
+CHSC:
+CHSD:
+CHSN:
+CHSR:
+CHST:
+CHSU:
+CLCC: H+U+
+CLCK: U+
+CLIP: %u U+
+CLIR: %u U+
+CME ERROR: 3,10,11,13,16,30,257 U+
+CMGC:
+CMGL:
+CMGR:
+CMGS: H+
+CMGW:
+CMS ERROR: 500 U+
+CMSS:
+CMT: U+
+CMTI:
+CMUT: H+U+
+CNUM: U+
+COLP:
+COPS: H+
+COTA:
+CPAS:
+CPBF:
+CPBR: H+
+CPBS: H+
%CPI:
+CPIN: H+U+
+CPINC:
+CPMS:
+CPOL:
+CPUC: "%s","%u.%.4u" U
+CPWD:
+CR:
+CREG: H+U+
+CRING:
+CRLP:
+CRREADY
@CRS:
+CRSM: H+U+
+CSCA: "%s",%u U
+CSCB:
+CSIM: a
+CSMS: %u U
%CSQ:
+CSQ:  %d,99 H+U+
+CSSI:
+CSSU:
%CSTAT:
%CTZV:
+CUSD:
+DS:
+ES:
+EXT ERROR:
+FCC:
+FCI:
+FCO:
+FCS:
+FET:
+FHS:
+FIS:
+FPI:
+FPS:
+FTI:
$FTM:
+GEVL:
+GIMG:
$GPRS:
$GSM:
+GTKA: U+
+GTKE: U+
+GTKI: U+
+GTKN: U+
$HSDPA_CQI_STATUS:
@HTCCSQ: U+
+HTCCTZV:
@HTCDIS: 0010;003f U+
%IATT:
@LOCKTIME: 01;02 U+
+PCD:
+PDP_DEACTIVATED U+
+PDP_ACTIVATED U+
%SATI: H+
@SIMLOCK: 01 U+
@SIMLOCK= 01 U+
+SIMTYPE: =1;2 U+
@TALK: U+ in/out time reported.
+VTD:
+SIM_SWITCH
+CMS ERROR:
+CME ERROR:
+EXT ERROR:
NW REACT
ME DETACH
ME DEACT
NW DEACT
NW DETACH
[[[WCDMA]] 1.00.02 TMO:1.00.04\r\n0\r
[[[WCDMA]] ASSERT CD\r\n
[[[WCDMA]] DEASSERT CD\r\n
$WCDMA:

Some commands observed on the htc kaiser (msm7200)

Command Options Comment
AT@HTCCSQ =1;+ENCSQ=1 signal quality?
AT@HTCDIS =1;@HTCSAP=1
AT+HTCmaskW1 =xxxxxx,xxxxxx
AT+HTCNV =1,12,6
AT+HTCCTZR =0 CTZR is time Zone
AT+HTCCNIV =0
AT@HTCDORMANCYSET =3
AT@HTCPDPFD =0
AT+HTCAGPS =5
AT@AGPSADDRESS =193,253,42,109,7275
AT+HSDPA =1
WCDMA WAKEUP PDA: 0(0),0(0),1(14),0(0)